metal net core conveyor belt
Usage:
Widely used in transporting materials of metallurgy, cement, electricity, coal & charcoal, mine, foundry, chemical industry etc. Used as high temperature resistance and burning resistance conveyor belt,anti-bearing conveyor belt, electric balance belt, round belt, fire resistance conveyor belt, and lifting conveyor belt.
Characteristics:
Metal screw net with core, burning resistance, high temperature resistance, flame retardant, puncture resistance, small elongating rate, high agglutinating intensity among layers, good slot moulding, 100% efficiency of sulfuration tie-in (tie-in and conveyor belt have same lifetime), short tie-in operation time(about 2-4 hours), easy to operate etc.
specifications series
|
specifications |
SN400 |
SN630 |
SN800 |
SN1000 |
SN1250 |
|
portrait drawing intensity N/mm |
400 |
630 |
800 |
1000 |
1250 |
|
thickness of metal net with core mm |
5.5 |
5.5 |
7.0 |
8.0 |
9.0 |
|
thickness of upper covering layer mm |
6 |
8 |
9 |
10 |
10 |
|
thickness of lower covering layer mm |
3 |
3 |
3 |
3 |
3 |
|
agglutinating intensity among layers(average value of portrait sample) |
=10N/mm |
|
=4.0N/mm |
|
10% burthen elongating rate |
=2% |
=2% |
=2% |
=2% |
=2% |
|
diameter of conveyor min. roller mm |
150 |
200 |
300 |
400 |
500 |
|
width of adhesive tape mm |
400-1400 |
for example
|
metal net core conveyor belt |
SN630 core materials code adhesive tape intensity |
800 belt width |
8+5.5+3 thickness of lower covering layer, thickness of upper and lodwer covering layer, thickness of metal net belt core |
Rubber6 Brand Trademark |
9908 manufacture date |
Variety
According to capabilities of covering layer, able to be classified into: common type, burning resistance type, high temperature resistance and heat resistance type, flame retardant type, abrasion-proof type, heat abrasion-proof type, acid, alkali, and oil resistance type, cold resistance type and high grade type.
|
variety |
standard and main guideline |
variety |
standard and main guideline |
|
common type |
GB/T7984 |
abrasion-proof type |
granding quantity=90mm3 |
|
high grade type |
Q/02XJLC 122 DIN 22B1X grade |
heat abrasion-proof type |
bearing below 125?,grinding quantity=150mm |
|
flame retardant type |
HG 2539II type MT147 MT668 |
acid, alkali, and oil resistance type |
Q/02XJLC 52 |
|
common difficult burning type |
GB10822 |
cold resistance type |
brittle temperature -20?--50? |
|
high temperature resistance and heat resistance type |
HG/T 2297 |
burning resistance type |
Q/02 XJL060-1999 |
Measure of conveyor belt
m2 = belt width x (thickness of upperper covering layer mm + thickness of lower covering layer mm + thickness of metal net with core mm) / 1mm x belt width m
measure of metal net conveyor belt quality
kg = [(thickness of upperper covering layer mm + thickness of lower covering layer mm)x rubber quality of per millimeter thickness kg/m2 + belt core quality kg/m2] x belt width m x belt length m
|
